Top 20+ tips and hacks to organize your garage
- Magnetic Toolbox Labels
- Pallet Dolly
- Hang Anything
- Handy Rag Cutter
- Floor Ruler
- Small Shop Space Saver
- DIY Garage Storage for Cords and Hoses
- Repurpose a Pallet for DIY Garage Storage
- Corral Sports Gear
- Overhead DIY Garage Storage System
- Sliding Pegboard Storage System
- Lockable Garage Storage Cabinet
- Rotating Corner Shelves
- Fold-Up Workbench
- Garden/Garage Tool Caddy
- Garage Storage Tubes
- Roll-Around Workshop
- Upcycled Garage Storage Idea
- Garage Door Extension Cord Storage
- Under-Joist Shelf
A blue toolbox with open drawers displays various tools, while safety goggles and power tools rest on top in a wooden garage environment.
Magnetic Toolbox Labels
Tired of trying to guess which toolbox drawer contained the tool I was looking for, I bought magnetic business cards at an office supply store. I peeled the film off the front, stuck a piece of card stock on top of it (old business cards work great) and labeled each drawer. — Laura Vogel.
An orange woodworking machine sits on a wooden pallet with wheels, positioned in a room with wooden cabinetry and a concrete floor.
Pallet Dolly
I had a truckload of lumber to transport down a long hallway to my shop, and I wasn’t looking forward to carrying it an armload at a time. Then I noticed the pallet it was on. I didn’t have a pallet jack, but I did have a set of casters.
After I installed some reinforcement blocking, it took just a few minutes to attach a four-inch caster to each corner of the pallet. Now it’s my all-around heavy-stuff mover. — Keith Jones.
A circular saw is mounted on a pegboard, surrounded by various tools, screws in containers, and measuring tapes, creating an organized workspace.
Hang Anything
A person holds a piece of blue fabric, securing it in a wooden vise on a workbench, with other garments nearby.
Handy Rag Cutter
Like many resourceful DIYers, I cut up old t-shirts and towels for rags in my shop. To speed up the process, I clamp a sharp utility knife in my bench vise to start cuts before tearing the material into smaller rags. If you’re careful, you can make the entire cut with the knife. Works like a charm! — Isaac Richardson.
A man kneels on a garage floor, marking measurements on a wooden board, surrounded by tools and storage on a workbench.
Floor Ruler
No need to scramble for a ruler every time you need to measure something big. Draw a ruler on your shop floor with a permanent-ink, felt-tip marker. It won’t be accurate enough for precise measurements, but for rough cutting it will save you time and effort. When the markings start to wear off, just redo them. — Christine Smith.
A man using a clamp secures wood on a workbench, surrounded by mounted power tools on a wall and a light-colored wooden backdrop.
Small Shop Space Saver
I have a small shop with a lot of bench-top power tools (table saw, router table, scroll saw, miter saw) I use often. To keep the shop uncluttered, I mount all my bench-top tools on 1/2-in. thick plywood bases and store them on hooks on the wall. When I need the tool, I just clamp the plywood base to my worktable with two large C-clamps. — Roger L. Favorite.
A wooden rack hangs on a wooden wall, holding various coiled cables—blue, yellow, and red—organized for easy access in a clean, indoor space.
DIY Garage Storage for Cords and Hoses
This one-hour project provides a simple way to hang things like extension cords, rope or air hoses away from your workspace. A DIY cord rack keeps them tangle-free and accessible.
A woman places a shovel on a wooden wall-mounted tool rack in a workspace, surrounded by a ladder and wooden walls.
Repurpose a Pallet for DIY Garage Storage
Long-handled yard and garden tools can be difficult to store. All you need for this organization hack is a pallet, a couple of screws and a drill. If you don’t have any pallets lying around, they’re easy to get for free. It’s a cheap DIY garage storage idea that takes about an hour and keeps your tools organized and easy to reach.
You could easily attach this pallet to a fence, shed or to the exposed wall studs in your garage. Just be sure your screws are long enough to go through the pallet and whatever you’re attaching it to. We drilled two screws into the pallet and one into each exposed wall stud. You won’t need a ton of screws or nails because the pallet isn’t that heavy.
Multiple sports balls are organized within a wooden rack, featuring elastic bands, against a neutral wall, with additional storage for smaller balls.
Corral Sports Gear
This sturdy corral holds a herd of balls and lets kids easily grab the ones at the bottom without unloading all the ones on top. It’s built from 3/4-in. plywood and 2x2s. We made our ball corral 24 in. wide x 33 in. high x 12 in. deep.
The hooks on bungee cords can be a safety hazard, so we cut off the hooks. (You also could use elastic cord available at camping, sporting goods and hardware stores.) Thread the cord through predrilled holes and secure with knots. Drill the holes slightly larger than the cords to make threading them easier.
We added plumbing hooks and short gutter troughs on the outside of the corral to make it easy for kids to stash smaller balls, helmets and mitts.
A man is adjusting a wooden platform holding blue storage bins above him in a garage, utilizing a pulley system for access.
Overhead DIY Garage Storage System
Tuck medium and lightweight stuff onto garage shelves suspended from the ceiling. The wooden overhead garage storage shelves fit into that unused space above the garage doors. You’ll need 16 inches of clearance to fit a shelf and standard 12-1/2-in. high plastic bins. However, you can adjust the shelf height and put them anywhere.
The only limitation is weight. We designed this 4 x 6-ft. shelf to hold about 160 lbs., a load typical ceiling framing can safely support.
A wooden tool storage unit displays various tools on pegboard, with a circular saw, battery, and glue bottle placed on top against a light-colored wall.
Sliding Pegboard Storage System
This project offers a twist on basic workshop storage. It employs both sides of seven pieces of pegboard, all housed inside a compact box. This pegboard storage system provides a compact solution for all your hand tools.
A wooden tool cabinet features a variety of tools hanging on pegboard, including shovels, wrenches, and screws, organized for easy access in a garage setting.
Lockable Garage Storage Cabinet
There are lots of dangerous tools and products around the home kids can get into, especially in your workshop and garage. This lockable storage cabinet gives you a safe place to store chemicals, paint, pest control products, sharp tools and other potentially dangerous objects.
The cabinet could be painted or stained and placed in the house as an extra pantry, cleaning supplies closet or hobby center.
A woman kneels near a rotating shelf, organizing various containers and paints in a workshop with wooden walls. She holds a paint can in one hand.
Rotating Corner Shelves
These shelves put a garage corner to maximum storage use. They spin on two lazy Susans, one on the bottom and one at the top (under the top shelf). Screwing the top shelf to the wall prevents tipping.
A wooden workbench with tools organized on a pegboard above it, situated against a wall, illuminated by natural light from a nearby window.
Fold-Up Workbench
Every good workshop, even if it’s just a sliver of your garage, needs a quality workbench with ample storage. Begin this space-saving starter workbench in the morning and you’ll be working on projects by the evening!
Garden tools are neatly arranged in a wooden rack, casting shadows on a wooden wall in a well-lit utility space.
Garden/Garage Tool Caddy
I had some leftover wood and plastic lattice from a fence I was building. Rather than toss the scraps, I decided to use them to build a caddy to organize my garden shovels, hoes and brooms. I installed casters so it scoots easily into a corner of my garage. Works great! — Philip J. Gruber.
Colorful tools, including a broom, rake, and tennis racket, are organized in cylindrical containers against a wooden wall, while a person retrieves a red pole.
Garage Storage Tubes
Cardboard concrete-forming tubes are inexpensive and provide a great place to store baseball bats, long-handled tools and rolls of just about anything. Rest the tubes on a piece of 2×4 to keep them high and dry and secure each tube to a garage stud with a plumbing strap.
A wooden workbench with tools and storage bins is situated in a well-lit workshop, featuring a saw above and a ladder nearby for access.
Roll-Around Workshop
If your garage does double duty as parking space and workspace, a rolling workbench is essential. It lets you convert your garage into a workshop quickly and rolls up against the wall to restore parking space. The version shown here began as a standard rolling bench made from 2x4s and plywood.
A man in casual clothes adjusts a tennis racket while standing near a workbench, tools, and machinery in a bright, minimally decorated workshop.
Upcycled Garage Storage Idea
Here’s a creative hack for that old wooden tennis racquet gathering dust in the garage: Drill a hole in the handle and screw it to the underside of a workbench. Position the racquet so it can swing in and out from under the table. Use it to hold tools, parts or other small items.
Colored cables are neatly organized on black holders, suspended on a white wall in a garage, with wooden beams visible above.
Garage Door Extension Cord Storage
Ever wish you had one more garage wall to hang stuff on? Well, you do. Your garage door is a perfect place for extension cord storage.
Install screw eyes diagonally about eight inches apart and thread bungee cords with the ends cut off through them for extension cord storage. Now you have a bungee “corral” to hold your extra extension cords. (Yes, they’ll stay put when the door opens and closes.)
A woman on a ladder places a box onto a wire shelf overhead, surrounded by wooden beams and cinder block walls in a garage environment.
Under-Joist Shelf
The unused space between overhead joists in a basement or garage is a brilliant place to install a heavy-duty wire shelf. The wire shelving is see-through so you can easily tell what’s up there. Store outdoor sports equipment, tackle boxes, coolers and other less-frequently-used items out of the way yet still easily accessible.v
